BNPKK - COPPER POWDER 40RL
- MSDS: BNPKK
- Manufacturer: SCM CHEMICALS
- Product Name: COPPER POWDER 40RL
- National Stock Number: 6810-00N032844
Product Identification
Product ID:COPPER POWDER 40RL
MSDS Date:11/01/1985
FSC:6810
NIIN:00N032844
MSDS Number: BNPKK
Responsible Party
CLEVELAND, OH 44113
US
Emergency Phone: 216-344-8800
Info Phone: 216-344-8800
Cage: 46343
Contractor
Telephone: 301-783-1120;301-931-4570
Cage: 46343
Ingredients
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: >99%
OSHA PEL 0.1MG/M3 FUME;1 DUST
ACGIH TLV: 0.2MG/M3 FUME;1 DUST
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION OF HIGH CONCENTRATIONS OF
DUST MAY CAUSE INTENSE SNEEZING, NAUSEA, WEAKNESS AND FEVER. CAUSES
HEMOLYSIS OF RED BLOOD CELLS, DEPOSITION OF HEMOFUSCIN IN LIVER AND
POSSIBLE INJURY TO LUNG CEL LS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. CONSULT PHYSICIAN. INGESTION: UNLIKELY. SEEK
MEDICAL ADVICE IMMEDIATELY IF IT OCCURS. INHALATION: REMOVE FROM
EXPOSURE. CONSULT PHYSICIAN.
Fire Fighting
Flash Point:>1290F,>699C
Extinguishing Media:GRAPHITE, DOLOMITE OR SODIUM CHLORIDE (DO NOT USE
WATER).
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COPPER POWDER BELOW 50 UG SIZE RANGE IS
CLASSIFIED AS WEAKLY EXPLO MATL.WHEN PRESENT AS DUST CLOUD WILL NOT
EXPLO READILY IN AIR. NOT EASILY IGNITED BY SPARKS.
Accidental Release
Spill Release Procedures:SPRINKLE WITH MODERATE AMOUNT OF DAMP SAND.
COLLECT FOR DISPOSAL AVOIDING DUST CLOUDS. USE BROOM, SCOOP OR
VACUUM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL DRY PLACE AVOIDING
CONTACT WITH FUMES OR HOT SURFACES. AVOID CREATING DUST CLOUDS.
Other Precautions:NONE.
Exposure Controls
Respiratory Protection:ANY NIOSH/MSHA APPROVED RESPIRATOR PROVIDING
PROTECTION AGAINST DUSTS, HAVING TLV NOT LESS THAN 0.05 MG/M3.
Ventilation:LOCAL EXHAUST TO MAINTAIN EMPLOYEE EXPOSURE BELOW TLV.
Protective Gloves:PLASTIC GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING & HAIR COVERING. "SKIN
GARD" CREAM FOR EXPOSED SKIN SURFACES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:1981F,1083C
Spec Gravity:8.96 (H2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:REDDISH COLOR POWDER-ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH ACIDITY.
Hazardous Decomposition Products:NOX IF REACTED WITH NITRIC ACID.
Disposal
Waste Disposal Methods:DUMP INTO LANDFILL OR RECLAIM FOR COPPER SCRAP
CONTENT. DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.